intro big
PLAY

Technology

Innovative Graphite Crown

Innovative Graphite Crown
New and old material


*Compared with conventional driver

The EZONE GT Type X Driver features a new Lightweight Graphite Crown material that reduces weight. The resulting 14% weight reduction produces a lower and deeper centre of gravity allowing for a higher, low spin trajectory to maximise distance and forgiveness.

A new dimension Graphite Namd

EZONE GT REXIS for EZONE GT shaft

The new Yonex EX 320 Graphite shaft has been specifically designed and manufactured to produce the optimum performance for the EZONE GT range. The EX 320 shaft provides rapid snapback for maximum ball speeds whilst maintaining stability at the tip for that all important accuracy.

Groove Flow Concept

The Driver features vertical polishing, whilst the Fairway Woods and Hybrids have slanted grooves.
The Iron adopts traditional horizontal grooves.

Driver FairwayWood Utility Iron

Vertical Reality

Vertical Polish

Vertical polishing on the face is a design that breaks the common way of thinking.

Traditionally, face polishing is performed in a horizontal direction, but the 'EZONE GT' adopts a new vertical polish. A design that eliminates the need for grooves on the face, whilst improving shot accuracy off the tee. Yonex have realised distance performance and improved accuracy, with a design that is not limited by the conventional way of thinking.

Ball movement comparison at the point of impact Ball landing position

Robot test data (3˚ open face angle)

Head
speed
mph
Ball
velocity
mph
Launch
angle
°
Spin
rate
rpm
Spin
axis
°
Carry
distance
yds
Total
distance
yds
LR
dispersion
yds
Vertical polish 86.7 125.9 16.0 3566 9.1 195.3 210.8 23.8
Horizontal polish 86.5 125.4 16.7 3869 11.0 191.7 205.6 28.8

Tested by Yonex


A new face design concept

Fairway Wood and Hybrid

The Slanted Grooves prevent grass and moisture from coming in-between the club face and the ball, helping to stabilise the ball flight reducing left and right side spin for more accuracy.

Movement comparison of balls at the point of impact

Dispersion Comparison

Slanted Horizontal Vertical
Left/right width 5.5 yds 8.9 yds 10.4 yds

Tested by Yonex

G-Brid Graphite Hybrid

G-BRID technology produces a distance enhancing lower centre of gravity combined with the super soft feel of a forged iron.


EZONE GT

Flight distance is improved by up to 5% when compared to conventional irons as a result of increased ball speeds and a high but penetrating ball flight.

The EZONE GT adopts the tour proven G-BRID head technology. The head is manufactured from Chrome Molybdenum steel (Chromoly Steel) which has high repulsion properties. These properties are further enhanced by heat treating the face to increase power and expand the sweet spot whilst the hosel remains soft, allowing for easier custom fit adjustments.

G-BRID Construction:

Inserting the graphite dampening material into the cavity creates a softer hitting feel at impact by suppressing vibrations whilst also producing an optimal lower and deeper centre of gravity.

G-Brid Construction

Robot test data (#7 iron)

Head
speed
mph
Ball
velocity
mph
Launch
angle
°
Spin
rate
rpm
Trajectory
height
yds
Carry
distance
yds
Total
distance
yds
EZONE GT 73.3 99.9 16.8 5115 19.1 135 148
Competitor 71.1 97.3 17.6 5580 18.9 129 141

Tested by Yonex

Line Up

page top